Spa Calcium Hardness Plus

AquaSparkle Spa Calcium Hardness Plus If the calcium hardness of your spa water is less than 100mg/l then it should be increased using AquaSPArkle Spa Hardness Plus.

Calcium Hardness:
- Calcium hardness (or total hardness) is the measure of how hard or soft the water is. The level will vary depending on where your water supply comes from, for example in some parts of Scotland & South Wales the water is very soft and in the South East, especially Kent the water can be very hard. The hardness depends upon the amount of mineral salts (mainly calcium) that are dissolved in the water and the more salts there are the harder the water is.

Problems Associated with incorrect Calcium Hardness Levels:
- Low Hardness - Corrosive water
- Low Hardness - Etching of surfaces
- Low Hardness - Foam
- High Hardness - Scale formation
- High Hardness - Filter calcification
- High Hardness - Cloudy water
- High Hardness - Staining

Ideal Ranges:
- Low calcium Hardness less than 100mg/l
- High calcium Hardness more than 200mg/l

If the calcium hardness of your spa water is less than 100mg/l then it should be increased using AquaSPArkle Spa Hardness Plus.

Dose Rates:
- To Increase Hardness in 1,000 Litres by 10mg/l requires 15g of Hardness Plus
- To Increase Hardness in 1,000 Litres by 25mg/l requires 38g of Hardness Plus
- To Increase Hardness in 1,000 Litres by 50mg/l requires 76g of Hardness Plus

If the calcium hardness of your spa water is greater than 200mg/l then AquaSPArkle Spa ScaleAway should be used to help prevent scale deposits within the filter, heater, pipework and on spa surfaces.

Dose Rates:
- To reduce hardness in 1,000 Litres requires 25ml of ScaleAway - Repeat every 24 hours untill your levels have returned back to normal range.

General Precautions
Dosing
- Wear eye and face protection and ensure granules are not blown back into your face.
- Never mix with other chemicals including household cleaners as a dangerous reaction may occur.
- When pre-dissolving always add product to water and not vice versa.

Handling/Storage
- Handle products in a well ventilated area - preferably outdoors.
- Wash hands after use.
- Ensure chemicals do not become damp in storage - store in a cool dry place.