Qty | Ex.VAT | Saving |
1-5 | £57.33 | - |
5+ |
£55.01
for 5 Litre
£68.80 Inc. VAT
| 4% |
Kleanz-All Probably the only cleaner required and one of the most powerful and versatile cleaners available, Kleanz-All will clean almost any washable surface leaving it streak free and with a fresh, clean fragrance. View More ... |
Prochem C503 Proshine is a high solids metallised 'dry-bright' floor finish formulated to give a long lasting deep gloss shine on vinyl, linoleum, thermo-plastic, rubber, sealed wood, cork, concrete, asphalt, terrazzo and other non-porous smooth floors coverings. High solids metallised emulsion floor polish. •
- High gloss, self-shining finish for a long lasting slip resistant shine.
- Two or three thin coats recommended for best results.
- White emulsion with acrylic odour.
- Coverage approx. 250m2 per 5 litres per coat.
Directions
- For professional and industrial use only.
- Proshine is ready-to-use. Do not dilute with water.
- Do not shake container.
- Ensure floor is clean, dry and free from all residues. Semi-porous, concrete and impoverished floors should be sealed with a base coat of Proseal.
- Spread Proshine evenly using a slightly damp mop or polish applicator. Apply 2 or 3 very thin coats, allowing 30 to 60 minutes between coats. Do not over apply.
- Coverage is approximately 250 m2 per 5L per coat.
- Allow final coat to dry completely before re-use. Do not buff floor at this stage.
- Periodically the floor gloss can be maintained by spray buffing with Protreat.
- Keep from freezing.
pH Values
- pH Concentrate: 9.0
- pH Diluted: Not applicable
All images used are for illustrative purposes and are not intended to be relied upon for, nor to form part of, any contract unless specifically incorporated in writing into the contract.
We reserves the right to change product images at any time without notice.
Would you like to tell us about a lower price? New customer? Start here.